stand alone Energy Gateway processor for remote monitors and controllers
Description
This is a stand-alone unit that contains Akida’s powerful Energy Gateway processor for the innGAUGE system. It has a low voltage power supply and can be optioned to be WiFi enabled for wireless connectivity with an existing router or it can be connected using an Ethernet cable.
The on board system software is used to configure the system, collect aggregate and analyze the data, and provide screenshots of the system status via web browser to any device that can access the router. If the router is connected to the Internet then the system can be accessed remotely across the Internet.
- Product Features and Specifications
- The Energy Gateway processor features a 250MHz Cavium ARM9 CPU and a 5000 LUT Lattice FPGA. With 64MB RAM and a bootable 256MB on-board flash drive with XNAND technology, this is a powerful and extremely reliable embedded solution. External devices can connect to the Control Server via Ethernet, 802.11g WiFi, USB host, USB device, or I2C ports.
The standard Control Server configuration implements the following features:
4 XUARTs* (2-RS232, 1-RS485, and 1 TTL level)
1 CAN Bus
SPI Support
I2C Support
DMX Support
Watchdog Timer
Up to 11 DIO Lines
Battery Backed RTC
Optional USB 802.11g WiFi Adapter
Temperature Sensor
Multipurpose Reset/Script Button
Power Consumption:
The Control Server requires about 3.2 watts of power (642mA @ 4.98V) for normal operation and will require more if connecting USB devices, a larger MicroSD card, or WiFi option. For this reason, it is recommended to power the device at 5-12V input via barrel connector or 2 pin terminal connector. - Gallery
