Point of Use monitoring for Akida’s innGAUGE, wattGAUGE and e-LOK systems
Description
The u-METER+ is designed to be installed in parallel to a load with no electrical connectivity wherein the high amperage, high voltage load does not run through the unit. It is powered by a 110V source which is converted into a 6V AC supply by an on-board, UL listed transformer. The unit is housed in a UL rated plastic case and contains a printed circuit board based monitoring, analysis and communication system. The unit has connectors where low voltage cables are attached to feed signals from external coils to take external measurements from existing electrical wiring. There are no relays for load management and this unit is a very simple application of Akida’s technology. The unit has an on-board FCC compliant radio for wireless communication.
HOW THE u-METER+ WORKS
- Overview
- The product uses up to, two external current transformers (CT1 and CT 2) to detect and monitor the electricity in the power cables. The Unit can be installed to monitor two separate circuits or one two-phase circuit. The on board TARAS digital energy metering cards (pat. 7555365) are able to translate the readings from the CT coils into values for power (Watts), frequency, voltage & current. This data is then relayed using RF wireless frequency of 2.4GHz to a remote Energy Gateway processor in an EMP or a Control Server that uses the system software to provide analysis and communication. The u-METER+, when integrated into a system such as innGAUGE will help in understanding of the cost of operating electrical equipment/appliances in a building and help the user save on energy costs.
- Support
- CAUTION: Make sure that you use your product safely and in accordance with all manufacturer guidelines and Government regulations.
COMPLIANCE - Manufactured to ISO-9001 Quality Assurance Standards & tested for compliance relative to configuration for intended market. Product tested to meet FCC and UL rating for USA, Canada and Europe.
WARRANTY - Limited One Year Warranty. Akida LLC warrants this product for a period of 1 year from date of purchase for all defects in workmanship or materials. All defective parts will be repaired free of charge or replaced.
Warranty Conditions
1. The product must be installed and operated in strict accordance with instructions provided. Akida LLC will not accept liability for any damage or injury caused by non-compliance of the instructions.
2. Warranty will only be given where proof of purchase date is provided.
3. This unit must not be modified in any way.
4. Akida LLC will not be liable for indirect, consequential or incidental damages.
5. Akida LLC reserves the right to change specifications or designs described in this manual without notice or obligation.
• Do not place the unit in water or other liquids.
• Do not subject the unit to excessive force, shock, dust, temperature or humidity.
• Keep the unit away from any heat sources.
• Do not open the unit and tamper with the internal components inside as there are no user serviceable components. This will invalidate the warranty.
• Do not attempt to repair the product yourself. Contact our customer service department if it requires servicing.
• The contents of this manual may not be reproduced without the permission of Akida LLC.
• Images shown in this manual may differ from the actual device.
UK
NOTE: The technical specifications for the products and the contents of the user manual are subject to change without notice. - Product Features and Specifications
- Readings
• KW/hr Used
• Power in Watts
• Voltage
• Current
• Frequency
• Power Factor
Features
• 2 External 100A split-core current sensors
Power Requirements
• Voltage: 110VAC to 250VAC
• Current: 30mA
• Frequency: 50/60 Hz
Housing
• ABS plastic enclosure
• Case protection IP65
• Indoor installation only; for outdoor mounting the unit has to be protected by an all weather enclosure
Environment
• Ambient Temperature Range: -20°C to +70°C
• Relative Humidity: 0 to 95% non-condensing
Enclosure Dimensions W x H x D
• 6.1” x 4.6” x 1.3”
Current Sensor
• Clip on split-core current transformer 100A with a 0.58” diameter hole
Accuracy
• Current RMS 3% over 1 to 100A
• Voltage RMS 1% over 90VAC to 250VAC
• Watts 3% over 100W to 9000W
RF Communications is on 2.4 GHz ISM band
• Bi-directional communication over a ZigBee network protocol.
• Wireless range of 200 feet in open area, but walls, partitions and electrical appliances may affect reception range. - Gallery
-
